Power Smart Dual Camera Battery Charger MH-26

Power Smart Dual Camera Battery Charger MH-26 for Nikon D5 D4 D4S EN-EL18 EN-EL4A EL4 Canon 1D IV 1Ds III LP-E19 LP-E4 LP-E4N MH-26 Dual Sequential Fast Charger For Nikon EN-EL18 EN-EL4 EL4A Canon LP-E4/LP-E4N/LP-E19 Battery Efficient, Environmentally, Energy-saving. Built-in Short Circuit, Overcharge Battery Protection IC, Highly Safe Charging show Indicator light flashing LED, Full Charged will turn to Green LED. Can charge two batteries, According to the order that be loaded to charging Use the calibration can be more accurately measure the battery power, so that ensure more accurate battery level display. Specification: The AC input Voltage: AC 100V-AC 240V Frequency: 50/60HZ Output Power: 25-30VA The No-load Voltage: DC 12.6V(12.45-12.75V) Output Current: 1.2A Charging Current: 1.2A Fit For: Nikon EN-EL18 EN-EL4 Canon LP-E4/E4N/E19 Battery Dimension: 154x80x41mm Weight: 380g Compatible products: Nikon D5/D4S/ D4/D3S/D3X/D3 Canon EOS-1DX/1Ds Mark III /1D Mark IV/1DMark III Applicable battery: nikon en-el4a/en-el4(it needs to be equipped with BT-A10) The Canon lp-e4/e4n/e19 lithium ion rechargeable battery (it needs to be equipped with BT-A20) 25 ℃ environment will be a full battery of battery is about the time: EN-EL18(2 hours 20 minutes) EN-EL4A( 2 hours 55 minutes) EN - EL4(2 hours 15 minutes.) the internal temperature of the battery will be increased during the use of the battery, especially in the high temperature environment. If the battery is charged at high temperature, it may not be able to charge or be fully charged.. Please wait for the battery to cool before charging. When recharge the battery, environmental temperature should be between 0 ℃ to 40 ℃ Charging method: Insert the plug into the electrical socket, all the lights are still out..When the battery is fully loaded, the battery begins to charge Indicator light flashing.